• 0.49/0.69/0.91/0.96/1.3/2.23 inch OLED Display Module IIC I2C Screen Arduino

Store CategoriesStore Categories  Detailed Description   0.49 inch I2C White Features: This is a 0.49 inches OLED display module of 64x32resolution in which the emissive electroluminescent layer is a film of organic compound that emits light in response to an electric current. Working without backlight, the OLED display module could give out light by itself. In low ambient light conditions such as a dark room, an OLED screen can achieve a higher contrast ratio than an LCD. OLED display module also has a much faster response time than an LCD. The display with small dimension is suitable for MP3, function cellphone, smart health device, etc. Specifications: Display Size: 0.49in Resolution: 64*32 Text Color: White Driver IC: SSD1306 Interface Type: IIC Pin Quantity: 14Pin Pixel Size: 0.155*0.155mm Operating Temperature: -40~85℃ Working Voltage: 3.3V Package Includes: 1 x OLED Display Module Note: This kit requires certain professional knowledge and ability, please make sure you know how to wire and use it.       0.69 inch I2C White/Blue Description: OLED display, no need backlight, self-illumination, the display performance is better than the traditional LCD display, also lower consumption. Size: 0.69 inch OLED Resolution: 128 x64 Display Color: White/Blue(Optional) Package Includes: 1 x 0.69”OLED Display Module       0.91 inch I2C White/Blue Description: OLED display, no need backlight, self-illumination, the display performance is better than the traditional LCD display, also lower consumption. Driver IC: SSD1306 Size: 0.91 inch OLED Resolution: 128 x 32 IIC interface Display Color: White/Blue(Optional) Pin Description: GND: Power Ground VCC: Power + (DC 3.3 ~5v) SCL: Clock Line SDA: Data Line       0.91 inch SPI White/Blue Features: Driver IC: SSD1306 Size: 0.91 inch OLED Resolution: 128 x 32 Font Color: White/Blue(Optional) Voltage: DC 3.3-5V PIN Interface: SPI OLED display, no need backlight, self-illumination, the display performance is better than the traditional LCD display, also lower consumption. SPI Pin definition: GND: Power ground VCC: Power CLK: Clock line MOSI: Data cable RES: Reset line DC: Data/commands CS: Chip select (when not use can be grounded directly)       0.96 inch I2C White/Blue/Yellow and Blue Features: No backlight, the display unit can be self-luminous High resolution: 128 * 64 Viewing angle:> 160 ° Supports many control chip: Fully compatible with Arduino, 51 series, MSP430 series, STM32 / 2, CSR chip, etc. Ultra-low power consumption: full screen lit 0.08W, 0.06W normal full-screen display of Chinese characters Wide voltage support: without any modification, directly supports 3V ~ 5V DC Working temperature: -30 ℃ ~ 70 ℃ Module volume (generous): 27.0MM * 27.0MM * 4.1MM Color:White/Blue/Yellow and Blue(Optional) Minimum occupancy on Earth IO port display: The IIC/I2C communication, as long as the two IO ports will be able to drive! Driver IC: SSD1306 No font: take the word with modulo software       0.96 inch SPI White/Blue/Yellow and Blue Features: Needn't backlight, the display unit can self-luminous High resolution: 128 * 64 Viewing angle:> 160 ° Supports many control chip: Fully compatible with Arduino, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc. Ultra-low power consumption: full screen lit 0.08W Voltage: 3V ~ 5V DC Working Temperature: -30 c ~ 70 c Module Size: 27.3MM *27.8MM Color:White/Blue/Yellow and Blue(Optional) I2C/IIC Interface, need 2 IO only. Driver IC: SSD1306 Package Included: 1 x 3-5V 0.96" SPI Serial 128X64 OLED LCD LED Display Module Blue Yellow Arduino       1.3 inch I2C White/Blue Needn't backlight, the display unit can self-luminous High resolution: 128 * 64 Viewing angle:> 160° Supports many control chip: Fully compatible with Arduino, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc. Ultra-low power consumption: full screen lit 0.08W Voltage: 3V ~ 5V DC Working Temperature: -30 ℃ ~ 70 ℃ Color:White/Blue(Optional) Module Size: 32.0MM*35.50MM*4.1MM I2C/IIC Interface, need 2 IO only. Driver IC: SSD1306(http://dl.vmall.com/c0a5f0ybmb) or SH1106(http://dl.vmall.com/c00sl1fyzc)       1.3 inch SPI White/Blue Needn't backlight, the display unit can self-luminous High resolution: 128 * 64 Viewing angle:> 160 ° Supports many control chip: Fully compatible with Arduino, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc. Ultra-low power consumption: full screen lit 0.08W Voltage: 3V ~ 5V DC Working Temperature: -30 ℃ ~ 70 ℃ Module Size: 32.0MM*35.50MM*4.1MM Color:White/Blue(Optional) SPI Interface, need 4 IO only. Driver IC: SH1106       2.23 inch SPI White/Blue   Product Introduction: 1.Size:2.23 inches 2.Resolution:128*32 3.Color:White/Blue(Optional) 4.Interface:68XX,80XX,SPI,IIC 24Pin FPC connection!!!       What is OLED? OLED (Organic Light-Emitting Diode) is a self light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. OLED possesses high application potential for virtually all types of displays and is regarded as the ultimate technology for the next generation of flat-panel displays.   The use of OLED technology offers the following advantages for flat-panel displays?
  • A simplified manufacturing process compared to TFT-LCD (See comparison of Picture 1 and Picture 2 below)
  • Self-emitting light, in contrast to the required backlight for TFT-LCD
  • High luminosity
  • Lightweight and thin (less than 2 mm)
  • Capable of wide viewing angles?~180??
  • Low operating voltage and power consumption
  • Quick response (~ ? second level)
  • Wide range of operating temperatures (-40c to 85c)
  •   A Comparison of OLED and TFT-LCD Display Technologies   How Does OLED Emit Light? OLED"s basic structure consists of organic materials positioned between the cathode and the anode, which is composed of electric conductive transparent Indium Tin Oxide (ITO). The organic materials compose a multi-layered thin film, which includes the Hole Transporting Layer (HTL), Emission Layer (EML) and the Electron Transporting Layer (ETL). By applying the appropriate electric voltage, holes and electrons are injected into the EML from the anode and the cathode, respectively. The holes and electrons combine inside the EML to form excitons, after which electroluminescence occurs. The transfer material, emission layer material and choice of electrode are the key factors that determine the quality of OLED components.   Note: If you decide to buy OLED display, you must confirm that you can make it work by yourself, we'll haven't any technology support except all the datasheet. Thanks for your understanding and support. FeedbackWe appreciate positive feedback . we always try our best to service our customers .   so if you have ant question ,PLEASE DON’T HESITATE TO TELL US,   we are always here to offer help .PaymentWe prefer PayPal .For purchasing multiple items , please contact us for a combined invoice . generally we would like to receive payment thin 48 hours if .  ShipmentWe provide airmail service with good package . The items will be shipped within the nest 2 business days after we received the payment . when you buy multiple items ,your shipping cost will be combined with discount .
    SHIPPING TIME (weekends/holidays excluded)    
       
    Country Name Shipping Time Country Name Shipping Time    
    USA/Canada 10 -15d Spanish/Portugue 10-25d    
    East/South Asia 10 -15d France/West Asia 10-25d    
    United Kingdom 10 -20d Italy 10-30d    
    Australia/New Zealand 10 -15d West Asia/Middle East 15-25d    
    Most Country of West/North Europe 10-20d South America and Africa 15-30d    
    East /Middle Europe/Russia 10-25d      
     About us
    • NEW, GOOD QUALITY, ORIGINAL PACKAGE
    • LARGE STORE AND THE LOWEST PRICE
    • NO-QUESTION-REFUND,
    •             FOR LARGE QUANTITY ,OFFER BETTER PRICE,ORIGINAL        PACKING(TAPE REEL/TUBE/TRAY)  
    We specialize in electronic components . ICs, Capacitors, Diodes, Resistors, LEDs, Transistors, and so on. Especially in Hard To Find Parts . we only sell NEW , ORIGINAL parts . please buy with confidence .We offer NO-QUESTION-REFUND  go to my store Am 09.01.19 hat der Verkäufer die folgenden Angaben hinzugefügt:

    Write a review

    Note: HTML is not translated!
        Bad           Good

    0.49/0.69/0.91/0.96/1.3/2.23 inch OLED Display Module IIC I2C Screen Arduino

    • Product Code:
    • Availability: In Stock
    • $2.20

    • Ex Tax: $2.20

    Disney Lilo Stitch | Saisons Complete | Экшн